Category: Arduino

Breadboard (prototyping board) – The basics

A breadboard or prototyping board, is a little board made of plastic studded with little holes where we can connect a lot of electronic components. What’s the point ? It’s about multiplying the pins of your Arduino/Raspberry Pi or every other device working with pins. If you don’t understand quite well, let’s take a concrete example : We want to set up a system which will retrieve the temperature from different temperature probes. We have

Serial – The basics

The Serial is the default communication protocol of Arduino. This means its via Serial that data transmits. For example, when you upload your code to your Arduino, it is via Serial (with a USB cable). You can check data transmission in real-time with TX and RX LEDs. TX blinking => Arduino is transmitting data. RX blinking => Arduino is receiving data. You can try to upload your code to the Arduino and watch for the RX led

Testing R2 Robot

Testing the R2 Robot One main function of the R2 robot is actually in test phase. You can find the Facebook video test just by clicking here. Stay tuned !

Robotic Traineeship for R1

Robotic Traineeship for the R1 in Ajaccio From Monday 31 October to Wednesday 2 November, there was the very first robotic traineeship proposed by Robomotic. The traineeship took place at CampusPlex at Ajaccio (France) where seven candidates mounted and programmed their own robots. Beginners and experts were able to test robotic kits. Thanks to this, at Robomotic, we were able to make a better documentation for our R1 robot pack so that the documentation responds to

Arduino Programmation Basics

  In this tutorial, we’ll see the basics of the Arduino programming langage. Once you understand this post, you will be able to understand all the other posts/tutorials on this website, you will also have algorithmic skills and it will be easy for you to learn other programmation langages. If the Arduino is not clear for you, I advice to look at the Essential of The Arduino. Introduction questions. What is a programming langage ?

Essential of the Arduino

In this tutorial, you will understand how an Arduino platform is working, how to use it and its utility in our projects. What is an Arduino ? The Arduino is a programming electronic platform (micro-controller)  which allow interaction in the “real world”. Thereby, the Arduino got “Pin(s)” which will be used as inputs or outputs depending of the project that we are realizing. Kind of inputs : a temperature sensor, a motion detector, an electronic switch… Kind of